Product name: Acrylic plastic isolating plate
Technical name: Acrylic plastic
Acrylic plastic suction process is a common process in acrylic processing. Acrylic plastic industry mainly includes: (1) Acrylic plastic door panel series: European and Chinese doors, door jambs, dados, ceilings, gussets, etc. (2) Acrylic plastic curtain box, sill plate, window cover, etc. (3) Acrylic plastic furniture series: desktop, bench, table top, shelf, kitchen (book kitchen, wardrobe), etc. (4) Acrylic plastic sound box series. (5) Acrylic plastic vehicle, ship shaped decorative products processing and production.
Acrylic blister lamp box is generally formed by the use of acrylic panel blister molding, and then combined with the base, etc., and then the led lamp or high-voltage lamp is placed inside. The first principle is to soften the flat plastic material after heating, use vacuum adsorption on the surface of the mold, and cool it to form. It is widely used in plastic packaging, lighting, advertising, decoration and other operations.
Production of acrylic blister lamp box, blister characters and document processing: planning documents can reduce the production workload. In general, attention should be paid to blister characters: the spacing between characters and strokes should be more than 4mm, or wider. If the spacing is too small, there will be no internal mold or external mold after one pass of the carving machine knife, Of course, if the font is small, it can be absorbed by the mold. When making the font of blister characters, pay attention to and understand the mistakes between the blister mold and the fonts of the products after blistering. You need to master them skillfully to make the blister characters and light boxes with beautiful appearance.
Mold making: use the software to output the repaired text to the engraving machine and then carve the density plate. The blister mold needs to be smooth and smooth. Make the blister characters without cutting corners to ensure a tight molding and reduce loss. As for the combination of large blister character molds, most blister character molds are larger than the operating desktop of the density board or carving machine, so it is necessary to combine, and it is necessary to combine, and select the parts with the smallest strokes as far as possible.
Grinding: after nailing the mold of the acrylic blister lamp box, polish it, and be careful not to have sharp burrs and corners, so as not to damage the acrylic plate. When the acrylic temperature base drops, start the palladium pressing machine up, otherwise it will be deformed after being taken out. It is necessary to press plastic large acrylic lamp box board and blister panel on the ground after they are taken out of the mold, otherwise they will be slightly deformed.
